Surface and Temperature Guide
Sure-Foot has a wide variety of anti-slip products that create safer surfaces, no matter the substrate or environment.
Whether your application is outdoors in the cold of winter and the heat of summer, or indoor and away from the elements, we can recommend the right solution to assure your patrons and workers are protected against slips, trips, and falls.
Among our four main product types, we cover every type of surface, in both controlled and extreme conditions. Our anti-slip tapes, fiberglass, aluminum stair, and rubber/vinyl treads all offer unique strengths in durability, lifetime value, ease of use and application.
Cement, steel, wood, and other more common substrates will require unique anti-slip solutions that meet their needs for adhesion and environment. The temperature will often be an essential distinguishing factor for which product is best in certain situations.
Our guide below breaks down our products and details the critical installation and temperature guidelines necessary to offer prolonged anti-slip protection.
Surface and Temperature Guide
Anti-Slip Product | Suitable Substrates | Indoor / Outdoor | Installation Method | Installation Temperature Requirements | Useful Temperatures |
Master Stop® Tape | Smooth Concrete, Wood, Metal, Tile & Composites (Should not be used on newly installed pressure treated lumber) | Both | Peel & Stick | Surface must be clean, dry and free of debris. Clean surface with alcohol or solvent prior to application (allow to dry) Ambient temperature must be above 55 F and below 110 F during installation | Adhesive can withstand -40°F and +220°F once installed |
Master Stop® EXTREME | Smooth Concrete, Wood, Metal, Tile & Composites (Should not be used on newly installed pressure treated lumber) | Both | Peel & Stick | Surface must be clean, dry and free of debris. Clean surface with alcohol or solvent prior to application (allow to dry) Ambient temperature must be above 55 F and below 110 F during installation | Adhesive can withstand -40°F and +170°F once installed |
SKID GUARD® | Smooth Concrete, Wood, Metal, Tile & Composites (Should not be used on newly installed pressure treated lumber) | Both | Peel & Stick | Surface must be clean, dry and free of debris. Clean surface with alcohol or solvent prior to application (allow to dry) Ambient temperature must be above 55 F and below 110 F during installation | Adhesive can withstand -40°F and +170°F once installed |
Fiberglass Step Covers & Walkway Panels | Any structurally sound surface including Concrete, Wood, Metal, Grating and expanded Metal surfaces | Both | Fasteners and/or Adhesive | No temperature Limitations, Surface should be free of debris | -80°F – +250°F once installed |
Deck Strips | Any structurally sound surface including Concrete, Wood, Metal, Grating and expanded Metal surfaces | Both | Fasteners and/or Adhesive | No temperature Limitations, Surface should be free of debris | -80°F – +250°F once installed |
BOLD STEP® | Any structurally sound surface including Concrete, Wood, Metal, Not recommended for Grated or Expanded Metal Steps | Both | Fasteners and/or Adhesive | No temperature Limitations, Surface should be free of debris | -80°F – +250°F once installed |
Master Stop® Tape Treads | Any structurally sound surface including Concrete, Wood, Metal, Grating and expanded Metal Steps | Both | Fasteners and/or Adhesive | No temperature Limitations, Surface should be free of debris | Adhesive can withstand -40°F and +220°F once installed |
Rubber / Vinyl Stair Treads | Any structurally sound surface including Concrete, Wood, Metal | Indoor | Adhesive | Surface must be clean, dry and free of debris. Ambient temperature must be above 50 F and below 100 F during installation | Adhesive can withstand -20°F and +170°F once installed |
Contact us to learn more about our anti-slip products and their uses.